甘肃兰州通风管道诚信加工厂

Overall kitchen price

一般都是按米或按套计算的。

Is generally according to meters or discrete calculation.

按米计算1：地柜，台面，吊柜分别按米计算价格，另在加上你所需的配件（拉篮等）及电器（油烟机等）的价格2：地柜（含台面），吊柜分别按米计算，另在加上你所需的配件（拉篮等）及电器（油烟机等）的价格。

According to the calculation of 1 meters: cabinet, table, cabinet respectively by the meter price, the other plus you need accessories (basket) and electrical (ventilator) price: 2 cabinet (including table), respectively by the meter cabinet, the other plus you need accessories (basket) and electric device (ventilator) price.

按套计算：就是这一套橱柜标出多少钱，含几米地柜，几米吊柜，什么台面，什么配件，什么电器等。（市面上的套餐一般都是3米地柜，1米吊柜，外加其他配置）

Is this: splitting calculation of a cabinet marked money, with a few meters to a few meters of condole cabinet, table, what, what parts, what appliances etc.. (packages on the market are generally 3 meters to 1 meters of cabinet, cabinet, and other configuration)

看你做多大的，6平米的厨房如果是2*3的长宽的话，橱柜一般50公分宽，做U型也要5延米左右，几百到几千一延米的都有，上下比例一般3:7，自己算一下就好，欧派的一般要3-4千一延米，其他的牌子就不一定，不过一般的装饰城1000一延米的就可以了。

How much do you see, 6 square meters of the kitchen if it is 2*3, the length and width of the cabinet, generally 50 cm wide, do U have 5 meter or so, hundreds of thousands to Yanmi have lower proportion, 3:7, count your own good, Optima to 3-4 thousand meters, the other the brand is not certain, but the general decoration City 1000 a meter on it.

整体厨房尺寸

Overall kitchen size

目前市场上常见的橱柜，其正常高度应该在820mm-850mm，台面宽度应该在550mm-600mm，吊柜高度通常为688mm-720mm,也有800mm、850mm、900mm的，这些尺寸是要额外价钱的。吊柜深度通常是330mm-350mm。这仅仅是参考数据，橱柜的高度可以根据自己的情况而进行设计。

At present, the common market cabinets, its normal height should be 820mm-850mm, mesa width should be 550mm-600mm, the cabinet height is usually 688mm-720mm, but also 800mm, 850mm, 900mm, the size is to the additional price. Diaogui depth is usually 330mm-350mm. This is only the reference data, and the height of the cabinet can be designed according to its own situation.

正常的地柜600mm宽，800mm高，吊柜320mm深，700mm高（不含顶线）。

The normal cabinet is 600mm wide and 800mm high, the cabinet 320mm deep, 700mm high (excluding the top line).

每个厂家都多少有些区别（标准毫米）：常见的地柜柜深550mm，高650mm，长度单门200mm，300mm、350mm、400mm、450mm、500mm、600mm。双门长600mm、700mm、800mm、900mm、1000mm。吊柜深300mm，高700mm或800mm，长同地柜，单门50一进制，双门100一进制，台面深度600，正立面高40mm、60mm。

Each manufacturer is somewhat different (standard mm): common ground cabinet 550mm, high 650mm, length 300mm, 350mm, single 200mm, 400mm, 450mm, 500mm, 600mm. The two doors are long 600mm, 700mm, 800mm, 900mm, 1000mm. Diaogui depth is 300mm, 700mm or 800mm, with the cabinet door, 50 door 100 a hex, a hex, table depth 600, the facade of high 40mm, 60mm.

制定标准尺寸生产厂家可以提前生产好标准柜体，根据订单生产门板，缩短供货周期，同时也为了安装配套的标准功能五金配件和厨房嵌入式电器。

The standard size manufacturer can make the standard cabinet in advance, make the door plate according to the order, shorten the supply cycle, and install standard functions, hardware fittings and kitchen embedded electrical appliances.

对于一张高于1100mm的早餐桌来说，这是摆在它周围凳子的理想高度。因为在桌面与凳子之间还需要300mm的空间来容下双腿。

For a breakfast table above 1100mm, this is the ideal height for the stool around it. Because there is a 300mm space between the desktop and the stool to accommodate the legs.